|
Range
of applications |
Applications: Home Garden Plumbing Do-It-Yourself Marine Building Automotive |
The solution to your problems
Easy Patch
provides a quick,
easy and effective
solution to
all your maintenance
and repair problems.
There is no
sealing, mixing
or brushing
needed, simply
peel off the
backing paper
and press it
firmly on to
the damaged
surface. Easy Patch will bond
to almost any
clean dry surface
such as wood,
metal, fiberglass,
concrete, glass
and most plastics.
Easy Patch is soft and pliable and will mould to virtually any shape. It cures on exposure to UV Light (Daylight) and the typical cure times range from 10 minutes to one hour depending on the intensity of the UV exposure.
Once
the product
has hardened,
it provides
a permanent
repair as it
is heat resistant,
tough, and waterproof
and can be drilled,
sanded and painted
if required.
back
to top
A range of applications as diverse as the imagination
A
Repair material
for the Construction
Industry:
Drainage Systems
Pipes &
Pipe Jointing
Repairs to
Tanks - oil,
water and chemical
Flat roofs
- or as a lead
or copper replacement
Damp Proofing
Repairs to
Floors/walls/ceilings
in food preparation
areas and hospitals
Decoration
& Design
Purpose made
trunking
Repairs to
refrigerated
rooms
Encapsulating
Asbestos
Repairs to
Swimming Pools
Anywhere that
lead, copper,
aluminium or
timber is used
- in large
areas or small
Repairing Equipment
& MachineryFarming
Applications
Repairs to
of Silage pits
Building ,
Machinery &
Equipment repairs
Drainage
Repairs to
Tanks
The
Arts
Modeling, Sculpture
Film, Theatre
& Television
props &
sets
Design Prototypes
Automotive
& Marine
Body Panels
& Floor
Linings
Crash Repairs
Exhaust Repairs
Hull and superstructure
strengthening,
repairs and
bonding
Waterways
Repairing Canals
Signs
Crash Barriers
Emergency road
markings
D.I.Y.
Literally Hundreds
of Interior
& Exterior
uses around
the home and
garden.
back
to top
Easy Patch is an ultra violet (UV) light curable Glass Reinforced Polyester (GRP)
material, manufactured in sheet form. The matrix of isopthalic resin,
e-type glass reinforcement, inert fillers and a photo-initiator is sandwiched
between 2 nylon films. A further black UV film provides for handling in
daylight.
Easy Patch is a special low styrene formulation polyester which contains approximately one third of the usual two component liquid polyester resins. The nylon films which minimize emissions and facilitate handling and shaping, can be marked out when transferring templates.
When fully cured all styrene emissions cease, unlike conventional resins where emissions continue for a considerable time. Easy Patch minimizes the risk of tainting and containment vessels can be returned to production quickly. Similarly, little heat is generated by Easy Patch whereas the strong exotherm of conventional resins can create problems with shrinkage. Due to the easier and safer handling, high tensile strength, minimal shrinkage, high resistance against UV degradation, Easy Patch is the preferred GRP solution for many organizations.
Easy Patch is manufactured under strictly controlled factory conditions. The resins and fibers used are in compliance with British Standards in respect of water potability, mechanical properties and durability.
Easy Patch is available
in three sizes
and comes complete
with adhesive
laminate. Storage
is recommended
out of direct
sunlight below
30degC with
a nominal 12
months' storage
time.
back
to top
Easy Patch has been vigorously tested at approved test centers and universities in Scotland, Wales and England and also in North America, Japan and Australia. Easy Patch has also achieved new WRc approval for water potability and has been tested by Thatcham for use in the Automotive repair market.
For further information
on Easy Patch’s
Technical specifications,
Test results
and certifications
please contact
our Technical
Department
at info@RedRoseUSA.com.
back
to top
For more
information on distributors please visit our Contact
page.
back
to top